Custom Collection

A 10K Yellow Gold Version of my Wolfhound ring. With a 5pt Diamond set in the center of it.

A Custom Celtic Wedding Ring Set. Made for an anniversary using the Clients Engagement Diamond.

A Gold 7mm Dianne Loveknot without borders with

a 0.85ct Diamond in a White Gold Bezel.

A 13mm Yellow Gold Dianne Loveknot with borders set with

a 0.5ct Diamond in a White Gold Bezel.

An Eternity Triskele Ring ET4 set with a Clients Diamond.

An Eternity Triskele Ring ET2 set with a Clients birthstones for a mothers ring..

A custom wax design of a Double Goddess

I make a wax ring initially and then cast it in Metal.

A new Tree of Life Ring. 5mm wide with a Copper Beech Leaf in 14KW

A Set of Two Tone Tree of Life Triskele Rings in White and Yellow Gold.

Nov 2006

A 14K Yellow Gold Version of the Giron Star Ring.

The Piercework really makes the design shine.

A Round Sapphire with two Diamonds in a Dianne Loveknot

7mm wide with a White Gold Setting.

Nov 2006

A Welsh Dragon Ring in Sterling Silver with Raised Gold Borders. The top border is Rose Gold and the Bottom Border is Green Gold.

Nov 2006

A pair of White Gold Kells Triskeles with no borders and custom runes on the inside.

Nov 2006

A new Eternity Triskele Design that is very symetrical on a 7mm wide Ring. Design Suggested by Don Pettipas of La Maison d'Or.

Another DImma Loveknot 6mm wide in Sterling SIlver on an 7mm Rose Gold Sleeve. Oct 2006

A new Ring of Kells Loveknots. Note how the design looks like an intricate form of the Dimma Loveknot from the 7th Centruy but is from the book of Kells and Lindisfarne from ~800-850.

Raised Ogham Runes _ Go Bracht "For Eternity". These runes are an ancient phonetic written language
in Ireland and Britain. Sept 2006

A pair of DImma Loveknot rings one 4.5mm wide without borders the other with raised White Gold Borders.

The Duro Celtic Bat ring. The Bat is a nocturnal symbol of abundance & luck. Oct 2006

A side view of the the Symetrical design on the Duro Celtic Bat Ring.

A Custom Wide Dianne Loveknot.

Currently this is the widest ring that we've made at 17mm wide at the front of it's taper.

The First Edition Signet Gryffin Ring with the Name "Leslie" engraved at the top.

A Gold version of a size 18.5 10mm Wolfhound Ring

The First Edition Fehu Rune Charm in Platinum.

My Custom Sleeve to fit a Clients existing Antique Engagement ring. Both in 18K White Gold.

White Gold Sleeve with ring out of it. This sleeve is only a size 5. Ring width is always a personal preference.

A Custom Dianne Loveknot in Sterling Silver with a Gorgeous Blue sapphire set in a 14K Gold Bezel.

Side view of the ring at Left. Note the height of the Bezel to accommodate the stone and the taper of the design.

A set of Dianne Loveknots in 14K Gold the ladies ring is set with a 20pt diamonds and 6x2pts

A scale photo of a Rune wax of "Fehu". To be cast in Platinum and finished by hand.

A set of Gold Braided Triskele Knots..

A Design Suggested by Don Pettipas of La Maison d'Or. for a Custom Celtic Knot Pattern. Below shows detail.

The Design had two triskeles at the sizing bar and a wave pattern around the shank. White Gold with a Slightly Raised Yellow Gold Border.

Finished in 14K White Gold with a Slightly Raised Yellow Gold Border.

The Top ring is a mount I set last year using my Clients Mine Cut Stones.

I needed to make a matching band that fit beside it with 3 pink stones and 2 diamonds.

My Dancing Fire ring. 9mm wide with Red Enamel in the design. An abstract design that looks like people dancing.

When flippled over the design looks like the flames of a fire.

The "Bailey" Triskele in Sterling silver. There are two versions of this a 10mm wide and a 15mm wide. Both Taper down to 5mm at the shank.

A side view of the "Bailey" Triskele in Sterling silver. This ring would look great with a round or Marquis cut stone set in the centre

A Wedding set of the Anglo Saxon Rune Rings. One 7mm wide and the other 5mm wide.

A Silver version of the Anglo Saxon Rune Rings. This one has raised letters and is 13mm wide.

A Wedding set of a very round White Gold Ring with a Rose Gold middle Ring and a matching Penne Pendant for the Gent who can't wear a ring

What the set looks like with the Chain.

A Wedding set of Wide and Medium width Wolfhounds.

Finished in 14K Yellow Gold.

One of my first Greenman designs put into a custom cufflink.

Finished with Green Enamel

A new design incorporating a Braided Loveknot with a Medieval tree of Life Design. Design Suggested by Don Pettipas of La Maison d'Or.

Side view of the Braided Loveknot with a Medieval tree of Life Design. This one is finished in 14KYellow gold with a Flush White Gold Border

A White Gold Version of my Wolfhound ring. With a 5pt Diamond set in the center of it. The White Gold is very masculine.

A custom Design of a Chinese horoscope symbols of a Rat and an Ox. The two circles will hold the spaces for the partners birthstones.

A small pin for the CHIMA association with a Ruby and Sapphire on each end of the design. Corporate designs are an excellent way to showcase my abilities.

A small pin for the CHIMA association with a diamond on each end of the design. This one was for the past president.

An Custom Ring in 18K Yellow Gold which I made for my Mother. The stone is an 8x10mm Emerald. The shoulders have fine hand engraving to accent the ring. Emeralds are hard but can be brittle. They need special care and should avoid getting wet.

A custom Signet ring for a band called Straightjacket.

An Engagement ring mount in 18KYellow Gold with 2 Triskeles Carved on the sides. The stone is a 1ct Canadian Diamond in a Platinum 4 Claw setting.

The Double Triskele Diamond Mount. A side profile. The two knot patterns actually protect the setting (claws) by being designed this way.

Thanks to Don for the suggestion to make this peice.

The top view of the Double Triskele Mount.

A traditional 6 claw Tiffany Engagement band in White Gold. Set with a 25pt Diamond.

All Stones are set by Jason Bellchamber.

The 9th handmade lock back pocketknife I've made, with Handengraving on the hilt and A Hand Polished Coca-Bola Handle.

A new 10mm ring featuring a Star Knot or Pentacle design.

A new design of an Ancient Double Loveknot in 10mm Wide.

A slim version (4.5mm wide) of the Ancient Double Loveknot

Above is a Custom Wide Dianne Loveknot with Borders in Sterling Silver. There is a Blue Sapphire set into a gold Bezet in the Center of the ring.

A side view of the Dianne Loveknot to demonstrate how it tapers.

Above is a Tri Gold Traditional Claddaugh Design suggested by Annie MacDougal for a client of La Maison d'Or.

The Three colours of Gold used, are White for the Hands and Shank, Yellow for the Back Ground Ring and Rose Gold for the Heart.

Above is a Family Crest using a Ostpreußen / East Prussian motif. It's a stag horn and I set the clients Ruby and used his gold as well. Forged and Handmade.

A 'Fishermans" cross that I made for a client at Christmas. Note how the knotwork looks like fish bodies.

This Dianne Loveknot is set with a .22ct VS2 F colour Diamond and is finished in 18K Gold.

A Traditional Claddaugh design in 14K White Gold with a Rose Gold Heart.

Above is a new Signet Design of a Rampart Lion on my crest ring design.

This Signet ring is a Lions Head, all finished in Sterling SIlver

Both of these rings where finished without borders. The Gents is a Welsh Dragon holding a Diamond and the Claddaugh Loveknot has peirced knotwork and is pave set with diamonds. Both are in 14K Gold.

This is a bold set of White Gold Griffin and Dragons one is 10mm wide and the other is 8mm wide. Both have Yellow Gold Borders the smaller is Flush and the wider ring has raised Gold borders..

Above is a 2x5mm baguette Family Ring that I made for my mom.

A slim Eternity Triskele ring with grooves to fit an engagement band.

A Custom Three Sapphire Ring in White Gold.

I set eight 3pt diamonds between the 7x5 oval Sapphires. A setting job like this takes about 5hrs. Each stone must be secure and straight. I also engraved a triskele loveknot on each side.

A Gents Signet Ring in White Gold. The Center stone is a .47pt diamond Bezel Set. The shoulders have triskele knots that are pierced and a simple knot design engraved on the signet face. Design Suggested by Don Pettipas of La Maison d'Or.

An Eternity Triskele ET4 but with wider custom borders in a Pale 14K Gold.

A Traditional Claddaugh all in Sterling Silver with two birthstones, a Peridot and a Citrine.

a custom ring for Don @ La Maison d'Or using a clients diamonds and Celtic serpent design.

A custom Tie Clip with a Claddaugh all in Sterling Silver.

Zackery Mo Cara Ring

Zackery Mo Cara Ring Side

This Zackery Mo Cara Ring is a custom design that I made for a Client who wanted a Gaelic phrase. It translates to "Zackery my Friend" I set the Clients Stone in the center of the ring. It's big too, a size 13.